Ignition coil and condenser replacement

[Sailon1]

Hello,

Advance auto parts has a ignition coil that they say will replace the Prestolite coil from my A 4, their part number EBC 1487. Has anyone use this replacement or similar replacements? likewise, I am looking for sources for replacement condenser. suggestions are greatly appreciated!

[ndutton]

No way, no how. The coil you referenced is rated 0.3 - 1.0Ω primary resistance. The Atomic 4 needs a minimum of 3Ω.

[hanleyclifford]

It is okay to buy stuff for the A4 at auto parts stores but don't expect them to know what you need. Inquire at Moyer Marine first.

[Sam]

Don't know if this helps much, I have early model with points, uses Prestolite distributor etc. I am comfortable and recommend STANDARD brand Moyer parts but have needed parts from local auto part store.

From NAPA: coil IC14 approx 3.5 ohms or Echlin 905
condenser AL38
points CS709
CAP AL91
Rotor AL58

This info is from my old invoice dated 2010

[hanleyclifford]

Whatever coil you select make sure to test voltage at coil+ - it should not exceed 12 volts.