Manifold Studs

[FelicityRebuild]

I'm in the final phase of reassembly of my rebuild and I'm installing a new manifold. The studs on the old one were SHOT, I have a local hardware store that carries all different types of engine studs. What size do I need for the manifold?

Thanks.

[Dave Neptune]

Studs

Matt, not sure of the size off hand and someone else will probably chime in on that. However do by the hardened ones (grade -8) if you can find them as they will be less prone to rusting away.

Dave Neptune

[hanleyclifford]

Manifold studs are available thru MM part #OBLK 04.0-113.