Tweet
Can anyone ID this carb? It is stamped "Zenith" and "made in USA. All cast iron, #10074.
-
Last edited by hanleyclifford; 07-13-2016, 08:24 PM. -
Hanley, looks like one of the old original cars on the A-4 from Zenith as it is cast iron.
Take a look inside for the venturi ID and see if it has the internal scavenge tube to determine if it is a marine carb.
Very interested in the venture diameter for sure.
Oh and thanx for sending the prop back.
Dave Neptune
-
I was doing some looking and the number does correspond to a replacement float for a zenith updraft antique carb....used on Case Tractors and other machinery. IH, and other equipment sometimes used the "same" or very similar carbs. From what I read the same carb, back in the day, might have been on a few different engines made by different manufactures... An eye opener for me but I couldn't hunt it down definitely.Mo
"Odyssey"
1976 C&C 30 MKI
The pessimist complains about the wind.
The optimist expects it to change.
The realist adjusts the sails.
...Sir William Arthur Ward.Comment
Comment