Hey all, So I finally got my starter rebuilt here in Eeuthera. It was a complete rebuild, armiture, coils, brushes, bendix, etc. So it should be brandy new right? Mechanic said he tested it and the solenoid. All work fine. Unfortunately, I still cant get the engine to start. Before I had a click from the solenoid but not action at the starter. Now I dont even get a click.
I checked all the wiring. I have key ignition. I am getting 12.7V at the coil and 12.7v at the distribution block leading to the solenoid. But on the solenoid itself, I am only getting 4.25V. Is the solenoid bad all of the sudden?
Is there a way to bypass it? I've tried jumping it across the solenoid posts, which yields nothing.
Everything is closed here until Tuesday, but I'd love to leave tomorrow and pick up a new solenoid in the next town. Any thoughts?
I checked all the wiring. I have key ignition. I am getting 12.7V at the coil and 12.7v at the distribution block leading to the solenoid. But on the solenoid itself, I am only getting 4.25V. Is the solenoid bad all of the sudden?
Is there a way to bypass it? I've tried jumping it across the solenoid posts, which yields nothing.
Everything is closed here until Tuesday, but I'd love to leave tomorrow and pick up a new solenoid in the next town. Any thoughts?
Comment