Tweet
I need to reset my idle after adjusting a number of things and I want to get the RPMs set correctly but I have no gauge installed. Is there a cheap version that I can temporarily connect to the coil just for setting the idle speed?
-
-
Sure...pick up any tach at the local auto store. I bought (and currently still have installed) a Sunpro for about $30.
It is not as good a gauge as the type Moyer sells, but you can still read it and discern engine within about 50 RPM intervals.-Shawn
"Holiday" - '89 Alura 35 #109
"Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!)
sigpic -
JC Whitney has a dwell/tach/volt analyzer for $40.Comment
Comment