We just added an exhaust wrap kit to our product line.
Each kit includes 15 feet of 2" wrap and two end clamps. The wrap is 1/16" thick and is usually sufficient to cover 4 to 5 feet of the 1-1/4" piping commonly used in constructing the hot section of an exhaust system. When the wrap is used so that there is approximately 1/4" of overlap, the temperature radiating from the pipe is reduced by 50 to 60 %. When a pipe comes within close proximity to a cockpit floor or other structure, the wrap can be used in two layers.
Don
Each kit includes 15 feet of 2" wrap and two end clamps. The wrap is 1/16" thick and is usually sufficient to cover 4 to 5 feet of the 1-1/4" piping commonly used in constructing the hot section of an exhaust system. When the wrap is used so that there is approximately 1/4" of overlap, the temperature radiating from the pipe is reduced by 50 to 60 %. When a pipe comes within close proximity to a cockpit floor or other structure, the wrap can be used in two layers.
Don
Comment