Great post and family effort!
If the top and bottom parts of the cylinder are sound, you can easily have a competent machine shop re-sleeve an A4 block. I have had this done several times with no problems. Depends on your neck of the woods, it can be reasonable priced. Down here, I have had all four cylinders bored and sleeved for $330 USD.
You can do it!
Please keep us posted.
Tom
If the top and bottom parts of the cylinder are sound, you can easily have a competent machine shop re-sleeve an A4 block. I have had this done several times with no problems. Depends on your neck of the woods, it can be reasonable priced. Down here, I have had all four cylinders bored and sleeved for $330 USD.
You can do it!
Please keep us posted.
Tom
Comment