You're On The Right Track
The ground side or circut is usually kept seperate from the hot circut. To have the ground side and hot side on the same switch is well......atypical.
The cut wire may have been the ground wire to the instrument cluster. You can see this for yourself or post a picture. Each gauge should be grounded. If the wire that was cut does come from the gauge cluster as a ground wire the other end went to engine ground or a buss bar then on to battery ground.
Have you consulted the "drawings and schematics" section of the forum?
TRUE GRIT
Originally posted by southcoasting
View Post
The cut wire may have been the ground wire to the instrument cluster. You can see this for yourself or post a picture. Each gauge should be grounded. If the wire that was cut does come from the gauge cluster as a ground wire the other end went to engine ground or a buss bar then on to battery ground.
Have you consulted the "drawings and schematics" section of the forum?
TRUE GRIT
Comment