MMI is pleased to announce a new product offering, a raw water flow sensor fully compatible with our Cole-Hersee oil pressure and water temperature alarm system.
Click here for more info!
The trip point is set to detect when raw water flow is reduced to a rate just below normal starter RPM (essentially a little more than a trickle). Although overheating is already monitored by the Cole-Hersee alarm, overheating can be caused by a variety of factors. This sensor provides specific monitoring of intake blockage, system obstruction, and offers impeller protection (spinning in a no-flow environment).
Bill
Click here for more info!
The trip point is set to detect when raw water flow is reduced to a rate just below normal starter RPM (essentially a little more than a trickle). Although overheating is already monitored by the Cole-Hersee alarm, overheating can be caused by a variety of factors. This sensor provides specific monitoring of intake blockage, system obstruction, and offers impeller protection (spinning in a no-flow environment).
Bill
Comment