At least that is what I think it is called. Put gas in the tank of my A4 yesterday and she fired and ran well on the hard. I she is in a 1966 Hinterhoeller HR28. So everything is old and recently new to me. I am clearly a newbie in the A4 world. Today as I came on board I smelled gas. Glad I checked before starting again. I noticed a slow drip coming from the bottom of the sediment bowl attached to my manual fuel pump. Taking it apart Iwas ssurprised to find no gasket of any sort. I have installed a squeeze bulb to pressurize the system and my guess is I had full pressure on the system and and this is what is causing the leak. any ideas on a fix? Do I need to order a gasket or otherwise get something to make a better bowl to lid connection? Thanks.
Fuel sediment bowl leaking
Collapse
X
-
I'd go ahead and give Ken a call at moyer marine....these guys are our hosts and Ken is wicked good on knowing his stuff. He will talk you through anything you need to do there. It is a good idea to take a pic of the carb for there are two main versions in popular use. The bowl is likely the same on both.Mo
"Odyssey"
1976 C&C 30 MKI
The pessimist complains about the wind.
The optimist expects it to change.
The realist adjusts the sails.
...Sir William Arthur Ward.
-
-
Check out gasket/washer here. http://www.moyermarine.com/cgi-bin/s...rebuilder.html about half way down the page. Also some members are moving away from the squeeze bulb set up due to safety and CG regs. You should be able to prime the system by using the manual option on the mechanical pump. Dan S/V Marian Claire
Comment
-
-
MC I believe that is exactly the part I need. Thanks for helping me make my first A4 purchase howbeit a small one. Is Moyer the main/only source for A4 parts? I am in Charleston, SC and wondering if that and other basic parts are available locally in the future. For now I need to keep moving so made the MM order. Thanks.
I do wonder about the priming bulb. My system looks like this:
1. 20 gal SS tanks goes uphill 3 inches to racor
2. Racor to manual fuel pump on engine block is a 10" drop.
3. The squeeze bulb is between SS tank and racor.
See pics below of my engine. I bought the boat/engine a month ago and really know very little about what I have here. The boat did come with original A4 manual as well as the nice manual from Moyer. Both have provided fun and educational reading but it could be that experienced eyes like folks on this forum might want to comment on what I have. I know it has the electronic ignition upgrade as well as the rebreather pipe. But that is about the limit of my knowledge.
Thanks all...
Comment
-
-
Looks like an early model. Head is definitely early with the crossover tube. Looks like a Dole T-stat housing. PCV valve has been added. Looks like a late model carb with a cobbled, probable non-conforming, spark arrestor assembly. Nice oil dip stick mod. Early model starter. Is that a block flushing mod below the accessory drive? Dan S/V Marian ClaireLast edited by Marian Claire; 02-28-2013, 06:06 PM.
Comment
-
-
" where does it go?" I think that spacer between the carb and manifold has two holes. The PCV line should/might feed into the backside of the spacer. Dan S/V Marian Claire
Edit: Is the port in the manifold open? That could be where the PCV line was hooked up ????Last edited by Marian Claire; 03-01-2013, 10:15 AM.
Comment
-
Comment