Any body else out there using the Indigo 3 blade prop? If so at what RPM are you cruising and at what speed?
Mine made an unbelievable differance while backing however while moving forward the acceleration or low speed pull (towing a small fiberglass dinghy) seems deminished a little. Above 1600/1700 RPM it seems tobe taking a pretty solid bight out of the water and works fine, below that it seems to rev up without much gain in speed acting a little sluggish.
Dave
E-35 Mk-II #146 1970
Original A-4 still running!
Mine made an unbelievable differance while backing however while moving forward the acceleration or low speed pull (towing a small fiberglass dinghy) seems deminished a little. Above 1600/1700 RPM it seems tobe taking a pretty solid bight out of the water and works fine, below that it seems to rev up without much gain in speed acting a little sluggish.
Dave
E-35 Mk-II #146 1970
Original A-4 still running!
Comment