I have a Pearson 30 with an Atomic 4 vintage 1972. I've been restoring her but the biggest problem is that I cant turn the A-4 flywheel.
I pulled the head, soaked the cylinders with PB and placed marvel mystery oil in the cylinders.
For about a week now I have been trying to shock the pistons loose with an oak block and a dead blow hammer. Tried a pipe wrench on the crank too. No movement and the oil doesn't seem to be getting down into the cylinders.
Gear box is in neutral, No evidence of water in the oil pan.
Any ideas?
Thanks
I pulled the head, soaked the cylinders with PB and placed marvel mystery oil in the cylinders.
For about a week now I have been trying to shock the pistons loose with an oak block and a dead blow hammer. Tried a pipe wrench on the crank too. No movement and the oil doesn't seem to be getting down into the cylinders.
Gear box is in neutral, No evidence of water in the oil pan.
Any ideas?
Thanks
Comment