Gents-
What is the expected engine operating temperature with a wide open system (no thermostat or adjustable ball valve) on a RWC engine with ambient water temp at around 60F?
I'm trying to verify that I've adequately flushed the crud out of my exhaust manifold. I *was* running at 120-140F with insufficient exhaust water and a lot of steam.
After power flushing the engine, I am down to 100-110F, at WOT, with little or no steam and more exhaust water. Am I there yet, or do I need more flushing?
Thanks.
What is the expected engine operating temperature with a wide open system (no thermostat or adjustable ball valve) on a RWC engine with ambient water temp at around 60F?
I'm trying to verify that I've adequately flushed the crud out of my exhaust manifold. I *was* running at 120-140F with insufficient exhaust water and a lot of steam.
After power flushing the engine, I am down to 100-110F, at WOT, with little or no steam and more exhaust water. Am I there yet, or do I need more flushing?
Thanks.
Comment