I have a Cat 30 and the shifting cable is attached to the lever at the lower hole on the port side, not the upper hole on the starboard side. As you can see in the picture, the clevis is not optimal, so I would like to change it, but my other concern is that there is not mounting bracket for the shifting cable, probably because the cable is beneath reversing gear cover plate, which is where such brackets are usually attached.
Also, I think there is an oil leak coming from the site where the shifting apparatus enters the reversing gear housing. The picture shows shiny oil.
The only problems I have with the reversing gear is the lack of an easy neutral position, otherwise forward and reverse work well for me.
So my question is about installing a bracket for the cable and where I should look for the oil leak.
Thanks!
Also, I think there is an oil leak coming from the site where the shifting apparatus enters the reversing gear housing. The picture shows shiny oil.
The only problems I have with the reversing gear is the lack of an easy neutral position, otherwise forward and reverse work well for me.
So my question is about installing a bracket for the cable and where I should look for the oil leak.
Thanks!
Comment