I have committed to rewiring the engine electrical on my Son's boat this winter. It currently is nearly original including the 8 pin connector as shown in the original manual. Plan is to eliminate the connector and install a cockpit voltmeter in place of the ammeter.
I have read most of the rewiring posts and studied the suggested wiring diagrams on this forum. I have also read advice on a site called Marine How-to which seems like an excellent source of info.
I am looking for the various wire sizes and colors for the project. I found boatwireusa.com which seems to carry most of it, but wanted to hear if someone has bought from them or has another source.
Steve B
C&C 35 MkI with A4
Port Huron, MI
I have read most of the rewiring posts and studied the suggested wiring diagrams on this forum. I have also read advice on a site called Marine How-to which seems like an excellent source of info.
I am looking for the various wire sizes and colors for the project. I found boatwireusa.com which seems to carry most of it, but wanted to hear if someone has bought from them or has another source.
Steve B
C&C 35 MkI with A4
Port Huron, MI
Comment