Hi Don and all contributors
Heres a stupid question - Im sure not the last from me!
I need to adjust the valve tapets but cannot figure out which is the exhaust/inlet valve for each respective cylinder - I know I could figure it out eventually from the header manifold but access is poor from that side and I can barely see what Im doing. So who has the magic numbers from 1-8 exhaust and inlet? Also am I right in my calculations that 10 and 12 thou inch = 0.250 and 0.310 mm respectively?
thanks
Heres a stupid question - Im sure not the last from me!
I need to adjust the valve tapets but cannot figure out which is the exhaust/inlet valve for each respective cylinder - I know I could figure it out eventually from the header manifold but access is poor from that side and I can barely see what Im doing. So who has the magic numbers from 1-8 exhaust and inlet? Also am I right in my calculations that 10 and 12 thou inch = 0.250 and 0.310 mm respectively?
thanks
Comment