You know, the thin one with the blade plug on the end? Should that be plugged into a gray wire that goes to the positive terminal on the coil?
When I took the wires off I labeled them, but after I found I'd labeled both wires from the electronic ignition as "coil +", I now doubt everything I've done.
So -- that thin yellow wire: to the positive terminal? And also -- what is that wire for?
Thanks!
When I took the wires off I labeled them, but after I found I'd labeled both wires from the electronic ignition as "coil +", I now doubt everything I've done.
So -- that thin yellow wire: to the positive terminal? And also -- what is that wire for?
Thanks!
Comment