Hi All,
In attempting to refine my engine alignment, I ran into an issue with the rear starboard engine mount stud spinning.
I am trying to avoid hauling the engine again to replace this mount (as I just hauled it last year to replace a cracked oil pan).
My dream would be to cut the stud underneath the pan, that way I can just slip out the mount. This leaves me with the problem of getting a new one in. Is anyone aware of motor mounts that have removable studs so that I could slip in the new mount and install the stud from above.
Any advice or ideas would be greatly appreciated! Thank you
In attempting to refine my engine alignment, I ran into an issue with the rear starboard engine mount stud spinning.
I am trying to avoid hauling the engine again to replace this mount (as I just hauled it last year to replace a cracked oil pan).
My dream would be to cut the stud underneath the pan, that way I can just slip out the mount. This leaves me with the problem of getting a new one in. Is anyone aware of motor mounts that have removable studs so that I could slip in the new mount and install the stud from above.
Any advice or ideas would be greatly appreciated! Thank you
Comment