I have a late model A4 that has a Sendure FWC kit on it. I am unable to find where the zinc pencil is. I have looked at every port on the device and all have a hose attached to them. Any advice?
Sendure FWC kit zinc location
Collapse
X
-
you may try contacting Sen-Dure.Their website has specs / drawings of the heat exchangers.www.sen-dure.com/Sen-DureCatalog.pdf
found their contact info on the front page.
SEN-DURE
P R O D U C T S , I N C .
6785 N.W. 17th Avenue
Fort Lauderdale, FL 33309
Phone: (954) 973-1260
Fax: (954) 968-7213
e-mail: sen-dure@worldnet.att.nety try contacting
thank google!
Mike
-
-
typo
Looks like a typo in Mike's C&P from Google - if you use the e-mail link, drop the extra "y" off the end of the e-mail address (att.net)
(Didn't mean to call you out Mike, I am a system admin, so I notice and do that stuff for a living - just trying to pass on good info to everyone)
-Shawn
"Holiday" - '89 Alura 35 #109
"Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!)
sigpic
Comment
-
Comment