New to me C&C 30 - 1 hull # 547 Atomic 4 30HP

[MarkAllan]

Hello I have bought a C&C 30-1 hull number 547 and I have an Atomic 4 30 hp with a late model 4 bolt carburator

Couple of questions

1) they have 2 alternator belts listed how Do I determine which one I need?

2) the carburator section show early model and late model part kits and nothing about 4 bolt or 5 bolt late models so these are interchangeable?

3) Is there another way to purchase a impellor for lake water cooling? any videos on how to change I do not even know where the collant pump is located on my motor??

[Al Schober]

Here's the first thing you need.

https://moyermarine.com/product/service-and-overhaul-manual/

[MarkAllan]

Here's the first thing you need.
https://moyermarine.com/product/serv...erhaul-manual/

That is on my wish list already.

[Dave Neptune]

The carb kits for the late model carbs are the same as is the carb, the only difference is the extra screw (bolt) at the front so the newer kits all come with a 5 hole gasket which will work on either one.

The pump is under the alternator on the back side of the accessory drive pulley. It is tuff to get to the bottom bolt so purchasing the extended bolt from our host is a good idea.

As far as the belt just figure out what alt you are using and is that all it drives. Some HX set ups drive off of the alt and some off the flywheel. Just give Ken a call at MMI parts and he will get you set up.

Dave Neptune

[joe_db]

It wouldn't hurt to post some photos of your engine.