I went looking for it in the catalog section and can't find it
Is the EWDS no more?
Collapse
X
-
As I was involved with the EWDS, I'll field this question. Yes Joe, you are correct. A decision was made to sunset the product.
We enjoyed favorable response and excellent performance of the product and reached a point where the printed circuit board supply ran low (there are two per unit). To continue offering the EWDS, a significant order of custom made PCBs from an offshore source became necessary. Being custom made, the quantities involved for decent pricing were, in a word, excessive.
There were several other factors involved but the PCBs were the tipping point. The discussion went on for a while and the decision was not made easily. A factor in the timing was to still have enough PCB supply on hand to support products in the field for a very long time.Last edited by ndutton; 09-12-2022, 11:23 PM.Neil
1977 Catalina 30
San Pedro, California
prior boats 1987 Westsail 32, 1970 Catalina 22
Had my hands in a few others
-
-
Can I make a suggestion?
Why not make a low fuel pressure buzzer/light product?
Most of us have or can easily set up the low oil pressure and overheating alarms, but almost no one has a low fuel pressure alarm that does not have the EWDS. I happen to have a fuel pressure gauge in the cockpit with a red light that comes on at 1 PSI or less, but most of the fleet either has nothing or a mechanical gauge near the engine, not cockpit readable.
You have the low fuel pressure switches still I presume. That and a light/buzzer and you are setJoe Della Barba
Coquina
C&C 35 MK I
Maryland USA
Comment
-
-
A low fuel pressure stand alone system can be cobbled together from off the shelf parts but it will need it's own indicator (buzzer and/or light). I'm not inclined to spend the time to make a proper product proposal to MMI for such a system but that shouldn't deter anyone else from doing so if they have the passion.
The first step is a working prototype.Neil
1977 Catalina 30
San Pedro, California
prior boats 1987 Westsail 32, 1970 Catalina 22
Had my hands in a few others
Comment
-
-
The EWDS has been on my wish list...
The longer I have been maintaining this motor the more I appreciate the unique types of data that can help with prevention and diagnostics.
If anyone is parting with their EWDS system in the future, I would consider buying a used system. Instrumenting this motor gives me greater confidence in ongoing operation and diagnostics.
Thanks for creating this system which represents a lot of instrumentation wisdom I have picked up piecemeal in the threads here.
Fair winds as EWDS goes end of life and into support only. All understandable.
Thankful for the forum and Moyer.Tim Smith
Oasis
Pearson 30
1974, Number 572
Boston, MA USA
Comment
-
-
Neil, Don,
If the EWDS is going into end-of-life support only, why not make the PC board CAD files public domain? This way, DIYers with electronics experience could use one of the PC Board prototyping companies (such as JLCPCB), to fab them.
These prototyping shops have prices that, while too high for production work, are quite tolerable for a hobbyist doing a one-off project.@(^.^)@ Ed
1977 Pearson P-323 "Dolce Vita"
with rebuilt Atomic-4
sigpic
Comment
-
-
Originally posted by edwardc View PostNeil, Don,
If the EWDS is going into end-of-life support only, why not make the PC board CAD files public domain? This way, DIYers with electronics experience could use one of the PC Board prototyping companies (such as JLCPCB), to fab them.
Originally posted by joe_db View PostWhat is the part number for the low fuel pressure sender?
If sourcing your own, it must be gasoline and alcohol rated, normally closed contacts and low pressure (~1 PSI). The Anfield part number above comes factory preset @3PSI, must be adjusted down to be useful for our application.Neil
1977 Catalina 30
San Pedro, California
prior boats 1987 Westsail 32, 1970 Catalina 22
Had my hands in a few others
Comment
-
Comment