During the winter, I purchased the Moyer FWC kit to put on my new Moyer-rebuilt short block.
Now that Spring is here, I'm starting to install it.
While inspecting the components, I just happened to notice a packaging problem that could have led to hours of frustrating troubleshooting.
The HX in the FWC kit comes packed in a box padded with expandable foam in a containing plastic bag in order to get a nice, tight, contoured padding.
The problem is that the foam expands with such force that it actually punched one of the hose barbs for the coolant loop through the plastic and pushed a nice slug of foam into the fitting! If I hadn't happened to notice it, the foam slug very likely would have ended up wedged in an elbow somewhere and led to puzzling overheating problems.
The fix in the future is easy. I recommend that all 4 fittings on the HX be fitted with plastic caps before shipping.
Now that Spring is here, I'm starting to install it.
While inspecting the components, I just happened to notice a packaging problem that could have led to hours of frustrating troubleshooting.
The HX in the FWC kit comes packed in a box padded with expandable foam in a containing plastic bag in order to get a nice, tight, contoured padding.
The problem is that the foam expands with such force that it actually punched one of the hose barbs for the coolant loop through the plastic and pushed a nice slug of foam into the fitting! If I hadn't happened to notice it, the foam slug very likely would have ended up wedged in an elbow somewhere and led to puzzling overheating problems.
The fix in the future is easy. I recommend that all 4 fittings on the HX be fitted with plastic caps before shipping.
Comment