I need help Identifying what the heck this is for... I have a late model engine. There is a rubber hose extending from the oil tap on the block below the valve chamber cover. (the tap that was used in the early model to attach the copper tube to lubricate the valves) The hose is about 8" long and has a male hose barb at the end and hangs loosely on the oil fill tube on the front of the engine by a wire tie. It seems like it was intended to fill or drain oil but I can"t imagine why there... Is that tap pressurized and if so why doesnt oil spray out of the loose end of the hose?... You can just see it in the attached photo
Thanks for the help
Tug
________
Dodge Aspen history http://pokerient.net/
Thanks for the help
Tug
________
Dodge Aspen history http://pokerient.net/
Comment