Yea I'm going to replace the pan.
Obviously oil pan gasket, but what other gaskets will I need for this job?
Which gaskets would you recommend using permatex on..if any?
I believe the pan bolts are 5/16 by 7/8", does that sound correct?
Should I be removing the output coupling/flange and flywheel housing off the motor as well for reinstalling the gaskets in the oil pan re-install?
Thank you in advance, I know some of those questions may seem elementary to many, but first time doing a job like this!
Obviously oil pan gasket, but what other gaskets will I need for this job?
Which gaskets would you recommend using permatex on..if any?
I believe the pan bolts are 5/16 by 7/8", does that sound correct?
Should I be removing the output coupling/flange and flywheel housing off the motor as well for reinstalling the gaskets in the oil pan re-install?
Thank you in advance, I know some of those questions may seem elementary to many, but first time doing a job like this!
Comment