I've installed a PSS dripless shaft seal and need to provide water to it. I can tee it into the engine raw water just after the pump (it's a RWC engine). PSS instructions state a maximum water pressure of 10psi and I'm thinking that the raw water pressure on the A4 doesn't get that high, but wanted to check with the experts! Can anyone confirm?
(I know I can also put it in the output from the manifold but it will be much simpler for me to tee the water line so that's preferred.)
Thanks
(I know I can also put it in the output from the manifold but it will be much simpler for me to tee the water line so that's preferred.)
Thanks
Comment