I am replacing the both of reversing gear housing and the accessory drive gaskets.. The last time it was done there was some type of sealer used...is it necessary to use sealer? thanks, pck
Gasket only or Gasket and "sealer"
Collapse
X
-
I used sealant (Permatex Aviation #3) on the accessory drive - it's unlikely to come apart again (or frequently) - and it's just about as oil wet as the rear housing.Last edited by BunnyPlanet169; 05-19-2015, 09:38 PM.Jeff
sigpic
S/V Bunny Planet
1971 Bristol 29 #169
Comment
-
-
Pearson 10M
Gloucester, Va
Comment
-
Comment