I recently wrapped a line around my prop shaft which as you would expect stalled the motor. I got towed since I was right off the dock and dove on it the next day to clear it, 4 wrapped on the shaft. I didn't think after clearing it there would be any problems. Wrong!
I took the boat out a few days latter Reverse worked great. I went to forward and at low RPMs, 1000 no problem but when I pushed it up to 1500 or 2000 the boat had no go I would only motor along at about 2.5 kn usually at 1500 I could hold 5 to 6kn no problem.
I took the boat out a few days latter Reverse worked great. I went to forward and at low RPMs, 1000 no problem but when I pushed it up to 1500 or 2000 the boat had no go I would only motor along at about 2.5 kn usually at 1500 I could hold 5 to 6kn no problem.
Comment