I'm having a problem adjusting the fwd reversing gear on my 1970 A4. The initial problem is clutch slippage in FWD. While trying to remedy this i find (while in neutral) that the adjusting collar (that adjusts the clutch) will only turn a 1/2 notch in the clockwise direction (and that is only by using a screw driver and block off wood as a lever). I have not tried to turn counter-clockwise direction. (I have noticed that even when in neutral the shaft turns slowly) I'm following the manual and have scoured the forums. They previous owner (user name in the forum: s/v dearbhail) doesn't seem to think the clutch is at the end of its usefull life. And suggest: " It’s more likely it’s rusted and stuck in place." I need a little help.
V/R Wesley Slade
V/R Wesley Slade
Comment