I'd like to put a flex coupling below the standpipe exhaust but want to be sure it is 100% leak free (to avoid becoming the S/V Asphyxiation). Most flex exhaust is w/o pipe thread so a complete seal seems to be the challenge.
I'm thinking sections of black iron threaded on one end & smooth on the other to clamp flex pipe over (something like the pic); maybe a sealant also (?)
If anyone has some experience w/ this please let me know.
Thanks much,
Leon
I'm thinking sections of black iron threaded on one end & smooth on the other to clamp flex pipe over (something like the pic); maybe a sealant also (?)
If anyone has some experience w/ this please let me know.
Thanks much,
Leon
Comment