I just purchased a 1977 Ericson 29 and am doing several upgrades to the engine. The biggest problem I have encountered is that the wiring connected to the engine is a cable monster... non-terminated loose wires, add-on relays, lots of old, stiff electrical tape no longer doing its intended job but still hanging on... you get the picture. I WILL remove all of it. The problem, of course, is what I need to do at that point. Any diagrams, literature, etc. would be much appreciated. I purchased the A4 maintenance and overhaul manual, but it does not diagram essential electrical connections.
I'm neither a mechanic nor an electrician, but can do this with the right information. Any thoughts?
Thanks in advance.
John
I'm neither a mechanic nor an electrician, but can do this with the right information. Any thoughts?
Thanks in advance.
John
Comment