This winter I'm adding a 3/4" Groco raw water strainer to my A4 between the thru hull and water pump. Unfortunately it will be a bit difficult to mount. There is no convenient bulkhead or panel to mount the strainer to, so I will have to construct some sort of backing plate to provide support.
Does anyone know if there is a maximum hose length or height (lift) restriction? I do not want to restrict flow by mounting the strainer too high above the thru hull. Currently the height between the base of the thru-hull to the inlet of the water pump is 9 inches.
Thanks
Does anyone know if there is a maximum hose length or height (lift) restriction? I do not want to restrict flow by mounting the strainer too high above the thru hull. Currently the height between the base of the thru-hull to the inlet of the water pump is 9 inches.
Thanks
Comment