Prop nut and zinc anode came today, which about wraps up the items needed to launch the Hannah Elizabeth for a short sailing season until November, then haul out again, paint on a proper bootstripe and continue to refit the boat.
Found a crack in my mast cap, so I made stainless plates for each side to take up the loads. I also finished an engine enclosure. I still have to make latches for the top panel, and line the inside with sound deadening material, but the box is made. I have edging that I will use around the edges of the enclosure.
Watching the weather for a launch date.
James
Found a crack in my mast cap, so I made stainless plates for each side to take up the loads. I also finished an engine enclosure. I still have to make latches for the top panel, and line the inside with sound deadening material, but the box is made. I have edging that I will use around the edges of the enclosure.
Watching the weather for a launch date.
James
Comment