Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Reversing Gear

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   IP: 108.51.19.207
Old 05-16-2021, 09:42 PM
svsonora svsonora is offline
Senior Member
 
Join Date: Sep 2020
Location: Washington DC area
Posts: 20
Thanks: 1
Thanked 7 Times in 2 Posts
Reverse keeps going out of adjustment

I bought the excellent service manual from moyer marine, and followed the adjustment procedures do the dot. I adjusted forward, then reverse. I had a good 2 inches left on the rear movement of the transmission lever at the engine as it started to engage, seemed to be safely fully engaged at the rearmost travel.

The problem is, after a day of sailing (motoring out of my harbor and the channel, then going back in), my reverse is gone. Nothing whatsoever when I move the cockpit lever back. I clearly had reverse when I backed out of the slip earlier today.

I've been wrestling with this problem for a few years.

Do I need a new transmission cable? What do I need to do?

By the way, my retaining clip is intact.
__________________
1975 Bristol 30 Sonora del Viento
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Reverse Gear Adjustment Aj@yknot Troubleshooting 8 08-08-2019 08:22 AM
Reverse and neutral adjustment dwkfym Troubleshooting 10 06-13-2018 11:39 PM
Forward adjustment in the reverse gear is maxed out? olindaboat Reversing Gear 10 05-27-2014 10:20 AM
Forward and Reverse Gear Adjustment Issues CraigRun Reversing Gear 12 05-17-2012 09:15 PM
Reverse gear adjustment rhaggard Drive Train / Propellers 2 10-28-2009 06:39 AM


All times are GMT -4. The time now is 06:28 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2021 Moyer Marine Inc.

All Rights Reserved