Tried to replace the throttle cable on my A4 with the Moyer replacement cable, but it is not compatible with my current throttle assembly (manufacturer is "Nagura" I think). Need ideas for replacement as the current setup does not operate carb effectivley...........the current cable is more of a choke cable w/very thin cable (see pic) and cannot return the throttle arm to idle (i.e. I have to manually push the throttle arm at the engine to get back to idle because the cable is not strong / rigid enough to return to idle).
Any thoughts? I didn't take a pic w/panel off the throttle handle, but the throttle cable / wire goes through the bolt and is connected to the handle with a set screw.
Any thoughts? I didn't take a pic w/panel off the throttle handle, but the throttle cable / wire goes through the bolt and is connected to the handle with a set screw.
Comment