I seem to find all sorts of articles about how Pearson used an external hull to deck flange and how them banging into docks and the sort can break the flange, but no one has mentioned if or how this is fixable. So what can you do to fix this once it has happened?
My P30 has a couple of spots where the hull is now flush with the deck. Part of the fiberglass flange is broken off, there appears to be a piece of wood between the deck and the hull. My biggest issue is that when it rains, water comes in on the port side aft. I'm trying to seal all the leaks and keep the water out of the boat. Has anyone had any experience with this?
My P30 has a couple of spots where the hull is now flush with the deck. Part of the fiberglass flange is broken off, there appears to be a piece of wood between the deck and the hull. My biggest issue is that when it rains, water comes in on the port side aft. I'm trying to seal all the leaks and keep the water out of the boat. Has anyone had any experience with this?
Comment