My Atomic 4 is presently a very nice Atomic 2. I suspect either stuck exhaust valves in cylinders 1 & 2 or a blown head gasket between them as there is no compression. I will be taking a shot with some Marvel Mystery Oil to cure the possible sticking valve problem, but suspect the next step of pulling the head will be necessary.
I know that I will be needing new head gaskets. But on review of the overhaul manual noticed that other parts may also need to come off, requiring additional gaskets (the exhaust manifold for example).
For this sort of head gasket replacement, what additional parts are needed.
Thanks.
Tom B
SV Jubilee
C&C 35 MKI
I know that I will be needing new head gaskets. But on review of the overhaul manual noticed that other parts may also need to come off, requiring additional gaskets (the exhaust manifold for example).
For this sort of head gasket replacement, what additional parts are needed.
Thanks.
Tom B
SV Jubilee
C&C 35 MKI
Comment