Greetings,
On my 33-1 there are a couple of chain plates to both port and starboard that appear to hold the deck down along the Genoa tracks to bulkheads below. There is a stainless steel square cap above each that fastens to the deck with four screws. Some of these screws no longer bight into anything and I wanted to remove the caps, fill the holes, drill out, rebed, and reattach. I figured that when I removed the screws the things would just fall off, but no. Any idea how to remove these stainless steel caps?
Ken
On my 33-1 there are a couple of chain plates to both port and starboard that appear to hold the deck down along the Genoa tracks to bulkheads below. There is a stainless steel square cap above each that fastens to the deck with four screws. Some of these screws no longer bight into anything and I wanted to remove the caps, fill the holes, drill out, rebed, and reattach. I figured that when I removed the screws the things would just fall off, but no. Any idea how to remove these stainless steel caps?
Ken
Comment