Help
I have a 1982 C&C 30 Mk1, when I start the engine and place in forward gear there is a loud intermittent banging noise, does not seem to happen in reverse.
I removed the drive shaft and ran the motor in gear and did not hear it. I then pulled the drive shaft checked it for warp then replaced the stuffing box and checked the cutlass bearing all checked out fine.
Now I'm really worried.
Does anyone have any ideas what might be causing the noise? Do I pull the motor and do a tear down?
Regards
Alan
I have a 1982 C&C 30 Mk1, when I start the engine and place in forward gear there is a loud intermittent banging noise, does not seem to happen in reverse.
I removed the drive shaft and ran the motor in gear and did not hear it. I then pulled the drive shaft checked it for warp then replaced the stuffing box and checked the cutlass bearing all checked out fine.
Now I'm really worried.
Does anyone have any ideas what might be causing the noise? Do I pull the motor and do a tear down?
Regards
Alan
Comment