Putting the project boat together and have a question for anybody that knows how the engine mounts in a C&C 30. This picture shows what I found when I picked up the boat. There are a bunch of blocks of 2x4 and 4x4's which I assume are just blocks that the previous owner used to remove the engine. However, you can kind of see on the right side (under the shoe), there are a pair of angle iron pieces. Does anybody know if they are supposed to be used in mounting the engine, or are they just some more engine removal tools?
Any hints/tips/tricks to simplify aligning the engine and prop shaft?
Thanks in advance,
Steve
Any hints/tips/tricks to simplify aligning the engine and prop shaft?
Thanks in advance,
Steve
Comment