Hello All,
I have a small issue in that I cannot seem to set the carb idle to 600ish RPM.
The engine starts on 2-3 revolutions but when I throttle up it will not return to a low idle, I would guess it comes down to only 11-1200 RPM. I use the choke to start but don't think it is truly needed.
I have the MMI hand book but I don't see where the adjustment is, perhaps I am not reading thoroughly enough. If I reach in to the throttle arm on the carb I can drop the idle to where it sounds correct.
Any help would be appreciated,
thanks,
Joe
I have a small issue in that I cannot seem to set the carb idle to 600ish RPM.
The engine starts on 2-3 revolutions but when I throttle up it will not return to a low idle, I would guess it comes down to only 11-1200 RPM. I use the choke to start but don't think it is truly needed.
I have the MMI hand book but I don't see where the adjustment is, perhaps I am not reading thoroughly enough. If I reach in to the throttle arm on the carb I can drop the idle to where it sounds correct.
Any help would be appreciated,
thanks,
Joe
Comment