I've seen several examples now of what seem to be raw water pumps in FWC systems that are mounted directly on the engine, just over the fly wheel. (eg. October '04 pin-up)
Mine is mounted on a rather flimsy bracket braced by two fly wheel cover bolts.
Is there a system (or secret) to fixing the pump on the engine? This installation looks to be more secure, with less possibility for flexing due to the mounting bracket.
My installation also had about seven washers on each mounting bolt to get the allignment correct. Not good.
Kelly
Mine is mounted on a rather flimsy bracket braced by two fly wheel cover bolts.
Is there a system (or secret) to fixing the pump on the engine? This installation looks to be more secure, with less possibility for flexing due to the mounting bracket.
My installation also had about seven washers on each mounting bolt to get the allignment correct. Not good.
Kelly
Comment