Tweet
Hi.
I own a Catalina 27 with an Atomic 4 engine. The boat was manufactured in 1979. I need to replace the drive shaft and I would appreciate any advice on were I can locate shafts for that boat and what kind of alloy would be best. The current shaft is 32 inches long and is 1 inch in diameter. I will also need to replace the drive shaft coupling from the motor to the shaft. I will also be replacing the cutlass bearing.
I am in Salt Lake City (laughing is ok)
and use the boat on the salt lake.
Thanks for your time.
Gary Stephenson
ps. the serial number on the Atomic 4 is 203893 and the model number is 5101
I own a Catalina 27 with an Atomic 4 engine. The boat was manufactured in 1979. I need to replace the drive shaft and I would appreciate any advice on were I can locate shafts for that boat and what kind of alloy would be best. The current shaft is 32 inches long and is 1 inch in diameter. I will also need to replace the drive shaft coupling from the motor to the shaft. I will also be replacing the cutlass bearing.
I am in Salt Lake City (laughing is ok)
and use the boat on the salt lake.Thanks for your time.
Gary Stephenson
ps. the serial number on the Atomic 4 is 203893 and the model number is 5101
Comment