Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Electrical

Reply
 
Thread Tools Display Modes
  #1   IP: 108.172.150.62
Old 10-13-2018, 02:23 AM
Marty Levenson Marty Levenson is offline
Senior Member
 
Join Date: Nov 2004
Location: Bowen Island, BC
Posts: 644
Thanks: 65
Thanked 33 Times in 29 Posts
coil post clutter

I have five wires landed on the + terminal of my coil. Access is poor and I was barely able to tighten on the 3/8 nut. Thinking of making a mini bus bar on a bulkhead with just one lead to the terminal. Anyone else done that? Any issues or drawbacks to be aware of?

Thanks!
__________________
Marty
1967 Tartan 27
Bowen Island, BC

Reply With Quote
  #2   IP: 24.152.132.140
Old 10-13-2018, 08:30 AM
ndutton's Avatar
ndutton ndutton is offline
Afourian MVP
 
Join Date: May 2009
Location: Torrance, CA
Posts: 8,137
Thanks: 123
Thanked 1,022 Times in 686 Posts
Here's a thread from a few years ago that discusses the issue:
http://www.moyermarineforum.com/foru...ad.php?p=99063
__________________
Neil
1977 Catalina 30
San Pedro, California
prior boats 1987 Westsail 32, 1970 Catalina 22
Had my hands in a few others
Reply With Quote
The Following User Says Thank You to ndutton For This Useful Post:
Marty Levenson (10-13-2018)
  #3   IP: 74.107.30.254
Old 10-14-2018, 10:42 PM
sastanley's Avatar
sastanley sastanley is offline
Afourian MVP
 
Join Date: Sep 2008
Location: Solomons, MD
Posts: 6,533
Thanks: 512
Thanked 310 Times in 243 Posts
Marty, I did this when I re-wired the boat years ago. A mini bus-bar is a great idea.

I feed the coil +12v from the ignition circuit with a dedicated wire, and then feed the "accessories" that we want to put on the coil(+) to the "ignition bus bar". If you get some nice, but spendy Blue Sea stuff, you can use little jumpers they sell on their bus bars to "share the love", or spread the load.
__________________
-Shawn
"Twice Around" - '77 Catalina 30, #511 with original A-4 & MMI manifold.
She is always happy with a clean bottom!

http://www.moyermarine.com/forums/signaturepics/sigpic3231_6.gif

Last edited by sastanley; 10-14-2018 at 10:45 PM.
Reply With Quote
The Following User Says Thank You to sastanley For This Useful Post:
Marty Levenson (10-14-2018)
  #4   IP: 192.186.122.174
Old 10-15-2018, 08:54 AM
GregH's Avatar
GregH GregH is online now
Senior Member
 
Join Date: Jun 2015
Location: Kingston, ON
Posts: 281
Thanks: 144
Thanked 20 Times in 18 Posts
Quote:
Originally Posted by sastanley View Post
Marty, I did this when I re-wired the boat years ago. A mini bus-bar is a great idea.

I feed the coil +12v from the ignition circuit with a dedicated wire, and then feed the "accessories" that we want to put on the coil(+) to the "ignition bus bar". If you get some nice, but spendy Blue Sea stuff, you can use little jumpers they sell on their bus bars to "share the love", or spread the load.
Did the same - makes for a neater system in a tight space. Used the Blue Seas bus bar.
Reply With Quote
  #5   IP: 192.55.54.40
Old 10-15-2018, 11:25 AM
ronstory ronstory is offline
Senior Member
 
Join Date: Feb 2016
Posts: 19
Thanks: 1
Thanked 0 Times in 0 Posts
I used a slightly different approach with one of the amaz*n pseudo-waterproof fuse blocks with LED indicators. Mine has really thin o-ring and with a touch of synthetic grease, you could dump a bucket of water on it an would stay dry. I wouldn't expect to handle submersion, but if that block on firewall is underwater, I have bigger problems. ;^)

I could not find the exact brand that I ordered 2 years ago, but below is a fair representation.

https://www.amazon.com/FidgetFidget-...waterproof+led

I have the ignition wired to a weather-pack style relay/socket that powers the fuse block directly from the battery switch output. I then connect coil +, electric FWC pump, fuel pump (via low pressure CO switch), field wire for alternator (via field CO on battery switch). The only connections off the coil is for the distributor Pertronix module.

This approach gets all the fuses in one place and if I see any LEDs on in the block, I know a fuse is blown. Then I don't need to dig round the back of the engine to replace those irritating in-line fuses. Plus I still have 2 more fused ignition switched outlets for the future. Also, those civilized color-coded ATC blade fuse don't require a magnifying glass to read their amp rating.

YMMV
__________________
Thanks,
Ron
Portland, OR

Last edited by ronstory; 10-15-2018 at 11:31 AM. Reason: typo
Reply With Quote
  #6   IP: 137.200.32.6
Old 10-15-2018, 01:25 PM
joe_db's Avatar
joe_db joe_db is online now
 
Join Date: May 2009
Posts: 3,125
Thanks: 37
Thanked 313 Times in 236 Posts
The coil post should not be a distribution bus for power.
Try this:
https://www.amazon.com/Blue-Sea-Syst...bus%2Bbar&th=1

Reply With Quote
  #7   IP: 64.62.192.42
Old 10-15-2018, 08:16 PM
toddster toddster is offline
Senior Member
 
Join Date: Aug 2011
Posts: 447
Thanks: 9
Thanked 28 Times in 24 Posts
Same. I used a Blue Seas fuse block in the engine compartment for just the engine harness and related circuits that feed through the engine control panel. Divided between "always on" and "switched" circuits.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Hot Coil and High Alternator Output Triton106 Electrical 53 10-02-2011 07:12 PM
Stripped coil terminal post ILikeRust Ignition System 8 09-26-2011 10:36 PM
engine stops Possum Troubleshooting 4 04-20-2011 09:19 AM
Fuse location in IGN to Coil + wire kwalters Ignition System 13 09-14-2009 05:01 AM
Hi, new member with a problem cpdeeley Introductions 10 01-11-2009 01:43 PM


All times are GMT -4. The time now is 02:58 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2018 Moyer Marine Inc.

All Rights Reserved