The (-) coil terminal is NOT a ground. You secondary lead spark test should have been to the block or head.
Electronic Igition Test
Collapse
X
-
Originally posted by ndutton View PostThe (-) coil terminal is NOT a ground. You secondary lead spark test should have been to the block or head.
I was also able to verify that the EI is good by powering up the IGN power and metering the Vdrop while I truned the motor over.
Really all that there is left to try is; A) jumping new wire from the BATT/IGN switch to coil, (bypass the switch) and B) Changing out the IGN coil wire (Secondary)
I should have this wrapped up by Haulout..
Comment
-
Comment