As some of you might remember, I bought a Chinese clone of my Morse control because the shift lever would slip on the shaft making it impossible to have a reliable control. When I first hunted for a replacement I found it listed at around $550. Now I see it for significantly less (but still $$$), although it doesn't look exactly like my old control with threaded rod and round knobs for handles. This looks more like the Chinese clone I tried.
I'm wondering what control you have in your boats (side cockpit mounted). Is there any lower cost alternative that's still strong enough to handle the shifting force of the A4? The Chinese clone isn't, plus the innards have corroded in two seasons even in fresh water. I'm thinking it might be better to make one with stainless mechanical tubing, but that would be a big project too.
Thanks,
Jim
I'm wondering what control you have in your boats (side cockpit mounted). Is there any lower cost alternative that's still strong enough to handle the shifting force of the A4? The Chinese clone isn't, plus the innards have corroded in two seasons even in fresh water. I'm thinking it might be better to make one with stainless mechanical tubing, but that would be a big project too.
Thanks,
Jim
Comment