just went through this today. If it is a late model A4 your point gap should be closer to .023. I would check this first
No spark...
Collapse
X
-
-
Finally reporting back on my "lack o' spark" situation. As you may recall from the above posts, I established normal voltage to the coil, but a very weak spark from the coil and no spark at the plugs. A couple of weeks ago I put in an order with MMI for a new coil, along with a new condenser, points and plugs, as they've all got eight years on them.
Got everything installed, double checked that the points gap was correct, AND REPLACED THE WIRE FROM THE DISTRIBUTOR WITH THE BREACHED INSULATION... feeling confident... and, after sitting in the slip for nearly a month, she started right up... running like a raped ape.
The time I spent troubleshooting and addressing the problem was maybe a couple of hours. To all of you who try the scatter-shot approach and hoping to get lucky with a guess as to the problem -- as I have done in the past -- you need to hear me now. Listen to the folks on the forum when they ask, "Do you KNOW" this or that... And then answer the question.
Comment
-
Comment