Hi, I'm a new member with my first question. We just purchased a 1978 Pearson 31 with an Atomic 4. The boat has always been in freshwater and based on general appearances, the engine appears to be in good shape. The following question is one of the issues I have found while going over the boat with a fine-tooth comb.
The engine has a 2:1 reduction gear (bell-shaped housing). However, the boat has a RH (CW rotation as viewed from behind the boat) prop. According to:
www.moyermarine.com/faq/11.24.html this is not the correct combination. Are there exceptions or do I have a new issue to deal with?
Thanks,
Roger
The engine has a 2:1 reduction gear (bell-shaped housing). However, the boat has a RH (CW rotation as viewed from behind the boat) prop. According to:
www.moyermarine.com/faq/11.24.html this is not the correct combination. Are there exceptions or do I have a new issue to deal with?
Thanks,
Roger
Comment