Hi All
I am new to the forum and I have C&C 34 1978 boat with the A4 engine with the crank handle on the front of the motor.
I can start the engine on the first time and it runs very well for 30-40 mins then it starts struggling and if try to increase the speed it doesn’t like it, if I lower the speed it slows but still struggles shortly after stops.
I have replaced the fuel / water separator filter and the fuel pump.
I removed the fuel from the old filter and gas looked great, the temperature gauge needle is showing between 140 - 160.
But my problem is still exactly the same.
I am new to the forum and I have C&C 34 1978 boat with the A4 engine with the crank handle on the front of the motor.
I can start the engine on the first time and it runs very well for 30-40 mins then it starts struggling and if try to increase the speed it doesn’t like it, if I lower the speed it slows but still struggles shortly after stops.
I have replaced the fuel / water separator filter and the fuel pump.
I removed the fuel from the old filter and gas looked great, the temperature gauge needle is showing between 140 - 160.
But my problem is still exactly the same.
Comment