I noticed a significant oil leak dripping and traced it back to the oil pressure sending unit. It's the old style that attaches to the engine block using a (2 inch?) nipple.
I'm assuming I just need to remove the nipple (counterclockwise) and either replace it or use teflon tape to seal the threads and reinstall it. My concern is the possibility of breaking off the nipple in the block.
Should I be concerned? Any advice is appreciated.
I'm assuming I just need to remove the nipple (counterclockwise) and either replace it or use teflon tape to seal the threads and reinstall it. My concern is the possibility of breaking off the nipple in the block.
Should I be concerned? Any advice is appreciated.
Comment