I am preparing to rewire the electrical connections related to my A4. Ancor's website does not show the Tan #14, Yellow w/red stripe #12, or Orange #8 AWG wire specified for the up to 20' runs shown in the most helpful "General Distribution of Engine DC Power" pdf available from Don at <DCpowerschemweb.pdf>.
Yellow/red #14 and Orange #10 are available. Since I have very short under 5' runs, are these smaller gauges OK for Ignition "ST" to Solenoid "S" (Yellow/Red) and from Ignition "BATT" to "Output" of alternator (Orange)?
Also, does anyone sell #14 Yellow/red by the foot? It is available only in 100 foot reels. Is there any Tan at all? Does anyone else besides Ancor make the appropriate wire?
It is odd that the what is apparently the only US company that makes the wire is both involved in the formulation of the ABYC standards, and does not make the wire required by the standard!
Am I missing something here?
Yellow/red #14 and Orange #10 are available. Since I have very short under 5' runs, are these smaller gauges OK for Ignition "ST" to Solenoid "S" (Yellow/Red) and from Ignition "BATT" to "Output" of alternator (Orange)?
Also, does anyone sell #14 Yellow/red by the foot? It is available only in 100 foot reels. Is there any Tan at all? Does anyone else besides Ancor make the appropriate wire?
It is odd that the what is apparently the only US company that makes the wire is both involved in the formulation of the ABYC standards, and does not make the wire required by the standard!
Am I missing something here?
Comment